ELM327 OBDII WiFi Car Diagnostic Wireless Scanner
GET DEAL NOWELM327 OBDII WIFI CAR DIAGNOSTIC WIRELESS SCANNER The ELM327 WIFI OBDII interface is an engine performance and diagnostics tool for automotive professionals and enthusiasts that allows you to wirelessly connect your car's on-board computer from your any Wi-Fi enabled device with the compatible application or software. The WiFi connectivity makes it compatible with BOTH Apple iOS (iPhone®, iPad®, iPod® Touch) and also Android devices! FEATURES Read and erase diagnostic trouble codes (DTCs) and turn off the check engine light Compatible with BOTH Apple® iOS and Android devices Pays for itself with one use Hassle-free setup: Setup in seconds View real-time vehicle data, graphs and performance parameters while you're driving Find and fix problems before they happen Support for low power sleep mode and high-speed communication Compatible with all OBDII compliant vehicles Wi-Fi connection provides a wider operating range than Bluetooth® Compatible with SAE J1850 PWM and SAE J1850 VPW protocols found on many Ford and GM vehicles (these protocols are NOT supported on cheaper scanners) Display and record real-time sensor data, including: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Rate Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim Engine RPM Fuel System Status Vehicle Speed Short Term Fuel Trim Long Term Fuel Trim Timing Advance Absolute Throttle Position Oxygen sensor voltages/associated short term fuel trims Material: Polycarbonate Note: Your vehicle may not support all engine metrics. The availability of engine metrics varies depending on the vehicle make and model SPECIFICATIONS SSID: WiFiOBD IP: 192.168.0.10 Subnet: 255.255.255.0 Port: 35000 Range: 50 FT (Line of sight) Antenna Type: Internal Operating voltage: 12V, internal protection from shorcircuits/overvoltages Nominal idle current: 45mA Power Consumption: 0.75 Watts Wi-Fi Standard: 802.11a/b/g Operating Temperature: -15 to 100 Dimensions: 2.75 x 1.25 x 1.2 inches Item Weight: 59.3g Compatible Protocols ISO 9141-2 (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (fast init, 10.4 kbaud) ISO 15765-4 CAN (11 bit ID, 500 kbaud) ISO 15765-4 CAN (29 bit ID, 500 kbaud) ISO 15765-4 CAN (11 bit ID, 250 kbaud) ISO 15765-4 CAN (29 bit ID, 250 kbaud) SAE J1850 PWM (Found on many Ford vehicles) (41.6 kbaud) SAE J1850 VPW (Found on many GM vehicles) (10.4 kbaud) SAE J1939 Apple iOS and Android Easy Setup: 1. Go to WiFi settings, search for the WiFi connection from the scanner and connect to it 2. Open your favorite application and connect. If necessary, set the IP to 192.168.0.10 and Port 35000 in settings Hardware requirements: PC/iPhone/iPod/iPod Touch/iPad/Android Important: Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking. Software Requirements: All ELM327 based software Android: Torque iOS base software in Apple store: Rev / FUZZYCar / DashCmd / SpeedPORT / Nova Scan/OBDcardoctor Attention: iOS base software are not included you must buy from Apple App Store! We only offer PC version software & Instructions manual (on the CD) VEHICLE COVERAGE Works with all models that support the OBD2 standard - European, Japanese, USA For your information: For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant. PACKAGE CONTENTS 1x ELM327 OBDII WiFi Car Diagnostic Wireless Scanner
SKU : 28538463565
GET DEAL NOW