Sip Paging Adapter With Line In And Out
GET DEAL NOWSIP PAGING ADAPTER WITH LINE IN AND OUT The CyberData SIP Paging Adapter is a VoIP endpoint that interfaces analog paging systems with SIP and Multicast-based audio sources. The SPA (SIP Paging Adapter) can be configured to support two separate SIP extensions. SIP extension one passes audio through to the analog output spoken from the caller's handset. When called, SIP extension two plays a bell audio that can be used as a night ringer when configured in a night ring group. The SPA supports up to 9 user-loadable messages that can be played by a DTMF command. The SPA supports a line-In input for playing MOH. FEATURES Two SIP extensions Voice prompt pass code and page control 9 user-uploadable page messages 10 channel prioritized Multicast ports HTTP Web Interface and setup Built-in diagnostics 10k Ohm input for MOH 600 Ohm Balanced audio out Unbalanced Line-Out Remote amp fault sensor DTMF and programmatic controlled Relay Delayed page support DTMF pass-through Cisco SRST 10/100 802.3af PoE SPECIFICATIONS Protocol SIP RFC 3261 Compatible Ethernet 10/100 Mbps Payload Types G711 Page Port Output Balanced 600 Ohm 10VPP Line In Input Signal Amplitudes: 2.0 VPP maximum Input Impedance: 10k Ohm Line Out Output Signal Amplitudes: 2.0 VPP maximum Output Level: +2dBm nominal Total Harmonic Distortion: 0.5% maximum Output Impedance: 10k Ohm Dimensions 6.11" L x 4.05" W x 1.15" H Operating Temperature -10 degrees C to 50 degrees C (14 degrees F to 122 degrees F) PACKAGE CONTENT 1 x Sip Paging Adapter With Line In And Out
SKU : 31853276102707
GET DEAL NOW